Jimny M13AA DOHC Xtreme Outback Clutch Kit-Sprung Ceramic Clutch Kit
Availability: 1 in stock
Ships tomorrow if ordered in the next 18 hours and 48 minutes!
The sprung ceramic clutch kits use an upgraded pressure plate combined with a ceramic friction disc in sprung configurations. This clutch kits range is designed for road and track going vehicles that require a higher torque capacity and temperature tolerance, and faster engagement. Clutch engagement is more aggressive than organic kits, so it is not recommended for daily driven vehicles.
These kits feature a high quality cover with increased clamping force compared with standard, between 20-40% depending on the demands of the individual vehicle.
They use a ceramic “paddle” friction disc which can result in more noise and harsher engagement and is mainly suited to high speed 4x4 trial or desert race.
Clutch Pro has a reputation throughout Australia and now in Europe for supplying the highest quality original equipment type clutch kits, clutch components, systems and accessories.
Clutch Pro globally sources from respected original equipment manufacturers to complete their comprehensive range.
This clutch is a high quality full kit that consists of :-
Pressure Plate
Clutch
Alignment Tool
Release Bearing
Pilot Bearing
Fitting Grease / Oil
Suitable for the following vehicles:-
Jimny 1.3 16V fitted with the M13AA Double cam 16V engine in both non VVT and VVT
As a rule these engines were fitted into hardtop jimnys from around 2001 to 2018
then in softtop jimnys from 2006 on
A photo of the engine that this model fits is shown in the pictures
Specifications: -
Torque (Nm) 370
Clamp Load 550KG (60% inc.)
Flywheel Step -2.1mm
Clutch Disc Diameter (mm) 190
Clutch Disc Spline Count 20
Clutch Disc Spline Diameter (mm) 22,2
Recommended for Street Performance, Heavily Loaded or Tow Vehicles
Design Single Plate
Diameter [mm] 190
Stage - Stage 2
Expected In-Stock Date | 30 Jun 2022 |
---|---|
Hide Ship Date? | No |